Skip to content

Taxonomy Editor

Use Taxonomy Editor to edit existing taxonomies or create new taxonomies by using Modules, Union, Intersect, Tag from endpoint, and related options. Taxonomies are usually created in Mining and assigned modules there, but Mining does not support building module chains from endpoints, columns, or tables. Taxonomy Editor lets you refine imported taxonomies or create new ones for microservice design.


Taxonomies tab

When you open Taxonomy Editor from the Decomposition section, the page opens on the Taxonomies tab. From there, you can view, create, edit, select, and delete taxonomies, and you can open the selected taxonomy directly in Taxonomy Graph.

The taxonomies are displayed together with description, category, type and action options as below.

wwdecompose decomposition 1 showing taxonomies displayed together with description, category, type

This information is loaded from the CSV files uploaded on the Import screen after you create a client and a project.

Each column supports filtering and sorting so you can narrow the results.

wwdecompose decomposition 2 showing Each column supports filtering sorting narrow results.

Creating a new taxonomy

To create a new taxonomy:

a. Enter an appropriate taxonomy name under the “New taxonomy name” text box.

wwdecompose decomposition 3 showing Enter appropriate taxonomy name under “New taxonomy

b. Select the type under the “Select type of…” drop-down menu. Then select the appropriate choice.

wwdecompose decomposition 4 showing Select type under “Select type of…” drop-down

c. Finally, click Create Taxonomy.

wwdecompose decomposition 5 showing Finally, click Create Taxonomy.

Locate the the new Taxonomy from the Taxonomies table to verify the creation.

wwdecompose decomposition 6 showing Locate Taxonomy from Taxonomies table verify creation.

Select or configure a taxonomy

Once a taxonomy is selected, its structure will inform what modules and groupings you see and work within subsequent tabs (such as Modules).

First, click Select to select a taxonomy.

wwdecompose decomposition 8 showing First, click Select select taxonomy.

The Select button will be grayed out to indicate that the corresponding taxonomy has been selected.

wwdecompose decomposition 9 showing Select button will grayed indicate that corresponding

The selected taxonomy is reflected on other pages. For example, on the Modules tab, the taxonomy is selected automatically when you open the page for modules associated with that taxonomy.

wwdecompose decomposition 10 showing selected taxonomy reflected other pages. example, Modules

Selecting a different taxonomy on the taxonomies tab will unselect the previously selected taxonomy.

Updating a taxonomy

At times you may need to modify an existing taxonomy with a more appropriate description of business process.

Click Update to update a taxonomy.

wwdecompose decomposition 11 showing Click Update update taxonomy.

This opens a window for editing and saving changes. Edit and then click OK to save the changes.

wwdecompose decomposition 12 showing This opens window editing saving changes. Edit

Display graph of a taxonomy

Click Show in Graph to display the taxonomy in the graph.

wwdecompose decomposition 13 showing Click Show Graph display taxonomy graph.

Afterwards, the “Taxonomy Graph” page will open and display the taxonomy you selected. You can also hover over elements within the graph to view the properties of each taxonomy:

  • The number of modules not expanded associated by circled number

  • Intersections: whether it be true or false

  • The title of the taxonomy

  • ID: is just for developers such as the DB ID

Below, the “Alledonia2” taxonomy is connected to “Other” taxonomy which in fact are other taxonomies in short. This is because we don’t want the graph to have a convoluted display. However, those taxonomies can be displayed. 

wwdecompose decomposition 14 showing Below, “Alledonia2” taxonomy connected “Other” taxonomy which

It is also normal for taxonomy names to overlap or blend in the visualization, but this can be corrected by doing the following.

a. Right click on your selected taxonomy.

wwdecompose decomposition 15 showing Right click your selected taxonomy.

b. Rearrange: allows for the graph to be rearranged to a clearer view as below.

wwdecompose decomposition 16 showing Rearrange: allows graph rearranged clearer view below.

wwdecompose decomposition screenshot 17

c. Show edges to OTHER: Will rearrange even further to show connected endpoints.

wwdecompose decomposition 18 showing Show edges OTHER: Will rearrange even further

wwdecompose decomposition screenshot 19

The graph layout can be customized by selecting a taxonomy and dragging it to your preferred position.

wwdecompose decomposition 20 showing graph layout customized selecting taxonomy dragging your

The "Show edges to OTHER” feature displays a blue dot on each taxonomy, which can be right clicked to access additional options.  This view also highlights incoming and outgoing connections using arrows, and the total number of connections between the selected taxonomy and others is indicated by the magnified red box.

wwdecompose decomposition screenshot 21

After clicking “Show edges to OTHER”, you can choose to expand outgoing or incoming boundary modules.

wwdecompose decomposition 22 showing After clicking “Show edges OTHER”, choose expand

Be mindful of the number of modules within a taxonomy before expanding outgoing or incoming boundary modules, as this can make the view complex. If expansion is selected, a filter modules window will appear to help you limit and organize the display.

wwdecompose decomposition 23 showing mindful number modules within taxonomy before expanding

Edge properties

Hovering over the question marks on the connection arrow will display edge properties displaying the exact number of connections outgoing and incoming.

wwdecompose decomposition 24 showing Hovering over question marks connection arrow will

Other display options

Again, to show other display options for a taxonomy, right-click the taxonomy.

wwdecompose decomposition Again, show other display options taxonomy, right-click

Show related taxonomies: will display a pop-up menu displaying related taxonomies not currently shown on the graph. By selecting any unrelated taxonomy from the table, you can instantly update the graph to include these elements.

wwdecompose decomposition Show related taxonomies: will display pop-up menu

wwdecompose decomposition

The example above only had 9 taxonomies so all nine were selected to display as below which gives you an idea on how to manage your displays.

wwdecompose decomposition example above only taxonomies nine were selected

The operator can also enlarge a display with up and down dragging of your mouse.

wwdecompose decomposition operator also enlarge display with down dragging

Left and right dragging of the mouse manipulates horizontal viewing.

wwdecompose decomposition Left right dragging mouse manipulates horizontal viewing.

Clicking out of the taxonomy graph menu to another menu and back will reset your view.

wwdecompose decomposition Clicking taxonomy graph menu another menu back

Show intersected taxonomies: When you hover over a taxonomy to view its properties, the interface will indicate whether it intersects with other taxonomies (intersection: true/false) as highlighted below.

wwdecompose decomposition Show intersected taxonomies: When hover over taxonomy

wwdecompose decomposition screenshot 46

If intersection is false, selecting this option will display a banner stating, “The selected taxonomy does not have intersections with other taxonomies.”

wwdecompose decomposition intersection false, selecting this option will display

If intersection is true, this means the selected taxonomy shares modules within it with another taxonomy. Displaying this intersection provides a clearer view of relationships within your system and may help identify opportunities to consolidate or harmonize related taxonomies.

Create bounded context: Creates a new bounded context directly from the selected taxonomy node.

wwdecompose decomposition Create bounded context: Creates bounded context directly

Set future state: Marks a taxonomy node with a future-state designation for planning and tracking architectural changes or migration paths.

wwdecompose decomposition future state: Marks taxonomy node with future-state

  1. Click the drop-down arrow to select a future state.

  2. Select a future state from the list.

wwdecompose decomposition Select future state from list.

Copy name: This option copies the name of the selected taxonomy node to the clipboard, making it easy to reference or use the taxonomy name in other contexts or documentation.

wwdecompose decomposition Copy name: This option copies name selected

Deleting a taxonomy

Deleting a Taxonomy will remove it from the Project. Click Delete within the Action column of a taxonomy. This action will remove an entire taxonomy and its associated modules from your project if it’s no longer needed so be mindful before doing this.

wwdecompose decomposition Deleting Taxonomy will remove from Project. Click


Modules tab

Modules are configurable components containing logic, rules, or data transformations that you can apply to taxonomies within the Decompose suite. The Modules tab lets you manage these building blocks to create flexible, reusable processing routines.

The most recently selected taxonomy in the Taxonomies tab automatically becomes the default selection in the Modules tab, together with all modules currently associated with that taxonomy. Within this workspace, you can:

  • Edit Taxonomies by Managing Modules: Add new modules or remove existing ones to customize how your taxonomy processes data.

  • Omit Modules from the Taxonomy Graph: Temporarily exclude specific modules from being represented in the taxonomy visualization for a cleaner or targeted view.

  • Render the Edited Taxonomy Graph: Instantly display changes and see how edits affect the structure directly within the Taxonomy Graph.

  • Delete a Taxonomy from the Project: Remove an entire taxonomy and its associated modules from your project if it’s no longer needed.

wwdecompose decomposition 56 showing Delete Taxonomy from Project:  Remove entire taxonomy

How to add modules to a taxonomy

To add a module within a taxonomy, start by ensuring the correct taxonomy is selected. You can do this in two ways:

a. Click the drop-down arrow in the “Select a taxonomy” search field under the Modules tab to choose from available taxonomies.

wwdecompose decomposition 57 showing Click :ant-outlined-down: drop-down arrow “Select taxonomy” search

b. Select your desired taxonomy from the list.

wwdecompose decomposition 58 showing Select your desired taxonomy from list.

After a brief processing period, the Modules tab will display all modules currently associated with that taxonomy. For example, choosing the “Control System (ICS)” taxonomy may show hundreds of modules, organized 10 per page.

wwdecompose decomposition 59 showing After brief processing period, Modules will display

c. To add more modules, click Add Modules .

wwdecompose decomposition 60 showing more modules, click Add Modules

A pop-up window will appear, listing additional modules available for selection.

wwdecompose decomposition 61 showing pop-up window will appear, listing additional modules

d. Click -> beside any module to select it. Once selected, the module will be grayed out and will appear in the list of selected modules at the bottom of the window.

wwdecompose decomposition Click - beside module select Once selected,

e. If you wish to remove selections, click Clear to remove all chosen modules, or click  beside individual modules to remove them from your selection.

Or

f. When satisfied with your selections, click OK to add the selected modules to the taxonomy.

Omitting a Module from a Taxonomy

To omit (temporarily exclude) a module from a taxonomy:

  • Follow steps a and b above to select your taxonomy and display its associated modules.

  • Locate the module you wish to exclude, then toggle the “Omitted” slider next to that module.
    This action will remove the module from being displayed in the taxonomy graph, allowing you to control which modules appear in visual representations without permanently deleting them.

wwdecompose decomposition 63 showing This action will remove module from being

The selected module when then switch to blue symbolizing on.

wwdecompose decomposition 64 showing selected module when then switch blue symbolizing

Removing a Module from a Taxonomy

If a module isn’t needed, you can simply remove it by clicking Remove corresponding to the module. 

wwdecompose decomposition 65 showing module isn’t needed, simply remove clicking Remove

However, the same can be added back by clicking Add Module and search for the deleted item. For instance, CLPA0202 was removed but you decided to add it back.

  1. Click Add Modules .

wwdecompose decomposition 66 showing Click Add Modules

The select modules to add to the taxonomy window will display listing modules.

wwdecompose decomposition 67 showing select modules taxonomy window will display listing

b. Click on the filter icon to limit the search to the deleted module.

wwdecompose decomposition Click :ant-filled-filter: filter icon limit search deleted

c. Enter the deleted module name in the filter window to search and then click the search icon.

wwdecompose decomposition Enter deleted module name filter window search

d. The deleted module should then display as below.  Click -> to add the module back to the taxonomy.

wwdecompose decomposition 70 showing deleted module should then display below.  Click

e. After you click ->, the module name appears under the selected modules section. You can clear that module or add more modules before you finish. When you are satisfied, click OK.

wwdecompose decomposition 71 showing After click -, module name appears under

Actions on selected Taxonomy

The Modules tab provides a section at the bottom of the page to delete the selected taxonomy or render it.

wwdecompose decomposition 72 showing Modules provides section bottom page delete selected

Again, deletion of a taxonomy is irreversible so be mindful before performing this action.

wwdecompose decomposition 73 showing Again, deletion taxonomy irreversible mindful before performing

Rendering a taxonomy opens the Taxonomy Graph page and shows the selected taxonomy.

wwdecompose decomposition 74 showing Rendering taxonomy opens Taxonomy Graph page shows

As below:

wwdecompose decomposition 75 showing below:

This completes the Modules tab section.


Union tab

The “Union” function, as the name suggests, is used to generate a taxonomy that is a combination of all existing taxonomies. Essentially, it sums up all the modules present across these taxonomies. The relationship between the modules inside the taxonomy will be copied to the union taxonomy.

When selecting the Union tab within the Taxonomy Editor, all taxonomies will display on given pages.

wwdecompose decomposition 76 showing When selecting Union within Taxonomy Editor, taxonomies

To combine taxonomies that have similar modules you could search for taxonomies to select or click -> corresponding to a taxonomy name.

wwdecompose decomposition 77 showing combine taxonomies that have similar modules could

Search for taxonomy using filtering

a. Click on the filter icon.

wwdecompose decomposition 78 showing Click :ant-filled-filter: filter icon.

b. Select the preferred “how to filter” mechanism by clicking the drop-down arrow and select an option. 

wwdecompose decomposition 79 showing Select preferred “how filter” mechanism clicking :ant-outlined-down:drop-down

c. Enter the taxonomy name you are searching.

wwdecompose decomposition 80 showing Enter taxonomy name searching.

d. Optionally, click the if additional conditions is needed for a refined search of a taxonomy. 

wwdecompose decomposition 81 showing Optionally, click :ant-filled-plus-square: additional conditions needed refined

If selected, an additional search field will display as below. If selected, an additional search field will display as below.

wwdecompose decomposition 82 showing selected, additional search field will display below.

You can add as many conditions as needed.

e. Once satisfied, click on OK .

wwdecompose decomposition 83 showing Once satisfied, click OK

The search will then display the result.

wwdecompose decomposition 84 showing search will then display result.

Combining taxonomies to add a union

a. Select the taxonomies from the list of available taxonomies by clicking -> . -> will gray out once a taxonomy has been selected.

wwdecompose decomposition 85 showing Select taxonomies from list available taxonomies clicking

To deselect a taxonomy from the union, click Clear selection or click beside the taxonomy. To clear every taxonomy on the right-hand side, click Clear Selection.

If you are okay with your selections, move to the next step.

b. Enter a new taxonomy name, select the type from the dropdown and then click Create union taxonomy .

wwdecompose decomposition 86 showing Enter taxonomy name, select type from dropdown

The tool will process and then create a new taxonomy. 

c. Search for the new taxonomy to verify the creation.

wwdecompose decomposition 87 showing Search taxonomy verify creation.

This completes the Union Tab section.


Intersect tab

In this tab, you identify and extract overlapping elements between two or more taxonomies. This is valuable for focus work—such as finding commonalities, redundancies, or shared features—in your data sets or classification schemes.

When selecting the “Intersect” tab within the Taxonomy Editor, all taxonomies will display on given pages.

wwdecompose decomposition 88 showing When selecting “Intersect” within Taxonomy Editor, taxonomies

To combine taxonomies that have similar modules you could search for taxonomies to select or click on -> corresponding to a taxonomy name.

wwdecompose decomposition 89 showing combine taxonomies that have similar modules could

Search for taxonomy using filtering

a. Click on the filter icon.

wwdecompose decomposition 90 showing Click :ant-filled-filter: filter icon.

b. Select the preferred “how to filter” mechanism by clicking the drop-down arrow and select an option. 

wwdecompose decomposition 91 showing Select preferred “how filter” mechanism clicking :ant-outlined-down:

c. Enter the taxonomy name you are searching.

wwdecompose decomposition 92 showing Enter taxonomy name searching.

d. Optional, click the if additional conditions is needed for a refined search of a taxonomy. 

wwdecompose decomposition 93 showing Optional, click :ant-filled-plus-square: additional conditions needed refined

If selected, an additional search field will display as below.

wwdecompose decomposition 94 showing selected, additional search field will display below.

You can add as many conditions as needed.

e. Once satisfied, click on OK .

wwdecompose decomposition 95 showing Once satisfied, click OK

The search will then display the result.

wwdecompose decomposition 96 showing search will then display result.


Tag from endpoint tab

Use this feature to create or edit a taxonomy by building a module chain that starts at an endpoint module and follows the endpoint connections until no more connections are possible. This feature determines the module where the chain starts.

When selecting the “Tag from Table” tab, one needs to understand what is being displayed.

  1. Incoming relations (the number of incoming relations to other modules)

  2. Outgoing relations (the number of outgoing relations to other modules)

  3. Read Queries (the number of read queries to databases)

  4. Write Queries (the number of write queries to databases)

  5. Total number of pages which capsulates the total number of modules as 10 modules displays per page.

wwdecompose decomposition 100 showing Total number pages which capsulates total number

One needs to have a strategy on where to begin when dealing with an extremely high number of modules.  You can start small or large so in the following scenario, we will start small to give an idea on how to use “tag from endpoint”.

Each column header has filtering which has currently has an option to display “greater than or equals to” to be set for incoming\outgoing relations and read\write queries.

wwdecompose decomposition 101 showing Each column header filtering which currently option

Adjust the filtering for outgoing relations to 5. You can remove the filter by clicking on "Reset" or adding additional conditions by clicking the plus symbol. Once everything looks okay with your filter click OK .

wwdecompose decomposition 102 showing Adjust filtering outgoing relations remove filter clicking

Upon clicking OK , your results should display as below:

wwdecompose decomposition 103 showing Upon clicking OK your results should display

Next, click on -> .

wwdecompose decomposition 104 showing Next, click -

Module VSNSV009 will now appear in the selected modules pane. Click Next to continue.

wwdecompose decomposition 105 showing Module VSNSV009 will appear selected modules pane.

You will now choose or create a taxonomy. This module is already linked to an existing taxonomy, which you may select, or you can opt to create a new, more specific taxonomy if needed. For demonstration purposes, let’s define a new taxonomy with an easily identifiable name. The name can always be changed later after completing the tagging process.

wwdecompose decomposition screenshot 106

At the bottom of the main windowpane, enter “Tag From Endpoint Taxonomy”, select the “Product Family” type and then click Create taxonomy .

wwdecompose decomposition 107 showing bottom main windowpane, enter “Tag From Endpoint

The newly created taxonomy will then show as being selected.  Click Next .

wwdecompose decomposition 108 showing newly created taxonomy will then show being

The screen will now display the assigned taxonomy and tag all modules being called by the module you selected.  Click Assign taxonomy to begin tagging from VSNSV009 to the last chained module.

wwdecompose decomposition 109 showing screen will display assigned taxonomy modules being

The process will then display a banner message indicating the number of modules tagged.

wwdecompose decomposition 110 showing process will then display banner message indicating

You may then go to the taxonomies tag to select your new taxonomy and then click Show in graph to get a visual display.

wwdecompose decomposition 111 showing then taxonomies select your taxonomy then click

Below, you will see the taxonomy you created displaying 10 modules as specified by the tagging.

wwdecompose decomposition 112 showing Below, will taxonomy created displaying modules specified

Double-click anywhere on the green bar to render all modules in the taxonomy, then click OK to continue.

wwdecompose decomposition 113 showing Double-click anywhere green render modules taxonomy, then

Below, you will see the highlighted module with directional arrows pointing to all related modules, whether they are linked in a chain or have direct connections.  

wwdecompose decomposition 114 showing Below, will highlighted module with directional arrows

One could even go further to see relations with other taxonomies by showing edges to others.

wwdecompose decomposition 115 showing could even further relations with other taxonomies

This will then display a bi-directional line to the other taxonomy group.

wwdecompose decomposition 116 showing This will then display bi-directional line other

We also see a number on the bi-directional line which indicates the total number of incoming and outgoing connections which tallies to over 47 thousand.

wwdecompose decomposition 117 showing also number bi-directional line which indicates total

We can explore the connections further by right-clicking on the blue dot within the “Tag from Endpoint Taxonomy”.  This will then display two options:

  • Expand outgoing boundary modules

  • Expand incoming boundary modules

When expanding outgoing boundary modules, we see four connections going out from the original “VSNSV009” module selected when initiating tagging.

wwdecompose decomposition 118 showing When expanding outgoing boundary modules, four connections

When you expand the incoming connections, you’ll see the total count for each connected module. These connections can be discussed further with the customer, and it may be possible to move the module to a different taxonomy based on the customer’s preferences.

wwdecompose decomposition 119 showing When expand incoming connections, you’ll total count


Tag from table

Use this feature to create or edit a taxonomy by building a chain that starts from a module with no incoming relation and ends at a module associated with a table in the module queries file. The chain traverses all modules in between. This feature determines the module where the chain ends.

wwdecompose decomposition 34 showing this feature create edit taxonomy building chain

From the module relations and taxonomies modules file, if the above module relationship diagram is considered, as an example and the module queries file is observed as below.

wwdecompose decomposition 35 showing From module relations taxonomies modules file, above

For example, the below chain of modules can be created and assigned to an existing taxonomy or a new taxonomy.

wwdecompose decomposition 36 showing example, below chain modules created assigned existing

In this case the ending module would be module300 that is associated with table1 from the module queries file. So, in this case it should be tagged from table1.

In the left navigation panel, navigate to Decomposition > Taxonomy Editor and switch to the "Tag from Table" tab.

From the Available tables table on the left-hand side, select the tables using the -> .

The tables can be sorted or filtered based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available tables.

Select the tables using the -> alongside the table.

wwdecompose decomposition 37 showing Select tables using - alongside table.

Once the tables move to the Selected tables window, it can be filtered or sorted based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available tables.

wwdecompose decomposition 38 showing Once tables move Selected tables window, filtered

If you wish to deselect any table listed on the right-hand side, click the next to it. It will move from the right side to the left side, indicating that it is deselected.

Then, click Next .

Or create a new taxonomy by entering a name, selecting a type.

wwdecompose decomposition 39 showing create taxonomy entering name, selecting type.

And then click Create taxonomy .

Once the taxonomy is selected (either new or an existing), it will appear on the right-side window.

wwdecompose decomposition 40 showing Once taxonomy selected (either existing), will appear

Click Next .

A message appears indicating the module assignment.

wwdecompose decomposition 41 showing message appears indicating module assignment.

Here either the read (SELECT) queries or Write (INSERT, UPDATE, DELETE) queries associated with the table can be selected or both.

Finally click on Assign Taxonomy .

After the assignment, a message appears indicating how many modules are assigned to the taxonomy.

wwdecompose decomposition 42 showing After assignment, message appears indicating many modules

You can verify the assignment from the Taxonomy Graph.


Tag between endpoint and table

Use this feature to create or edit a taxonomy by building a chain that starts from an endpoint module and ends at a module associated with a table in the module queries file. The chain traverses all modules in between. This feature determines both the start and end modules.

wwdecompose decomposition 43 showing this feature create edit taxonomy building chain

From the module relations and taxonomies modules file, if the above module relationship diagram is considered, as an example and the module queries file is observed as below.

wwdecompose decomposition 44 showing From module relations taxonomies modules file, above

For example, the below chain of modules can be created and assigned to an existing taxonomy or a new taxonomy.

wwdecompose decomposition 45 showing example, below chain modules created assigned existing

In this case the starting module would be mod301 (endpoint module) and ending module would be module200 that is associated with table2 (DELETE query) from the module queries file. So, in this case it Should be tagged from table1 with Only Write Query.

Should be tagged from table1 with Only Write Query.

In the left navigation panel, navigate to Decomposition > Taxonomy Editor and switch to the "Tag between Endpoint and Table" tab.

From the Available modules table in the left-hand side, select the modules using the -> .

The modules can be filtered based on the Name, Incoming Relations, Outgoing Relations, Read Queries and Write Queries to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available modules.

Select the modules using the -> alongside the module.

wwdecompose decomposition Select modules using - alongside module.

Once the modules move to the Selected Modules window, it can be filtered based on the Name, Incoming Relations, Outgoing Relations, Read Queries and Write Queries to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available modules.

wwdecompose decomposition screenshot 47

If you wish to deselect any module listed on the right-hand side, click the next to it. It will move from the right side to the left side, indicating that it is deselected.

Then, click Next .

From the Available tables table in the left-hand side, select the tables using -> .

The tables can be sorted or filtered based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available tables.

Select the tables using the -> alongside the table.

wwdecompose decomposition 48 showing Select tables using - alongside table.

Once the tables move to the Selected tables window, it can be filtered or sorted based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available tables.

wwdecompose decomposition 49 showing Once tables move Selected tables window, filtered

If you wish to deselect any table listed on the right-hand side, click the next to it. It will move from the right side to the left side, indicating that it is deselected.

Then, click Next .

From the taxonomy table, select either an existing taxonomy clicking -> .

wwdecompose decomposition 50 showing From taxonomy table, select either existing taxonomy

Or create a new taxonomy by entering a name, selecting a type.

wwdecompose decomposition 51 showing create taxonomy entering name, selecting type.

And then click Create taxonomy .

Once the taxonomy is selected (either new or an existing), it will appear on the right-side window.

wwdecompose decomposition 52 showing Once taxonomy selected (either existing), will appear

Then, click Create taxonomy .

A message appears indicating the module assignment.

wwdecompose decomposition 54 showing message appears indicating module assignment.

Here either the read (SELECT) queries or Write (INSERT, UPDATE, DELETE) queries associated with the table can be selected or both.

Finally click Assign Taxonomy .

After the assignment, a message appears indicating how many modules are assigned to the taxonomy.

wwdecompose decomposition 55 showing After assignment, message appears indicating many modules

You can verify the assignment in Taxonomy Graph.


Tag from column to endpoints

Use this feature to create or edit a taxonomy by building a chain that starts from an endpoint module and ends at a module associated with a column in a table in the module queries file. The chain traverses all modules in between. This is a more detailed approach than Tag between endpoint and table because it considers columns in the query.

wwdecompose decomposition

From the module relations and taxonomies modules file, if the above module relationship diagram is considered, as an example and the module queries file is observed as below.

wwdecompose decomposition From module relations taxonomies modules file, above

For example, the below chain of modules can be created and assigned to an existing taxonomy or a new taxonomy.

wwdecompose decomposition example, below chain modules created assigned existing

In this case the starting module would be mod301 (endpoint module) and ending module would be module300 that is associated with column011 in table1 as per the module queries file. So, in this case it should be tagged from column011.

In the left navigation panel, navigate to Decomposition > Taxonomy Editor and switch to the "Tag from Column to Endpoints" tab.

From the Select Columns in the left-hand side window, expand schema using , expand the table and then select the column using the -> .

The schema, tables and columns can be sorted or filtered based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available schema, tables, and columns.

Select the column using the -> alongside the column.

wwdecompose decomposition Select column using - alongside column.

Once the columns move to the Selected columns window, it can be filtered based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available columns.

wwdecompose decomposition Once columns move Selected columns window, filtered

If you wish to deselect any column listed on the right-hand side, click the next to it. It will move from the right side to the left side, indicating that it is deselected.

Then, click Next .

From the Available modules table in the left hand side, select the modules clicking -> .

The modules can be filtered based on the Name, Incoming Relations, Outgoing Relations, Read Queries and Write Queries to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available modules.

Select the modules using the -> alongside the module.

wwdecompose decomposition Select modules using - alongside module.

Once the modules move to the Selected Modules window, it can be filtered based on the Name, Incoming Relations, Outgoing Relations, Read Queries and Write Queries to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available modules.

wwdecompose decomposition

If you wish to deselect any module listed on the right-hand side, click the next to it. It will move from the right side to the left side, indicating that it is deselected.

Then, click Next .

From the taxonomy table, select either an existing taxonomy clicking the -> .

wwdecompose decomposition From taxonomy table, select either existing taxonomy

Or create a new taxonomy by entering a name, selecting a type.

wwdecompose decomposition create taxonomy entering name, selecting type.

And then click Create taxonomy .

Once the taxonomy is selected (either new or an existing), it will appear on the right-side window.

Click Next .

A message appears indicating the module assignment.

wwdecompose decomposition message appears indicating module assignment.

Finally click Assign Taxonomy .

After the assignment, a message appears indicating how many modules are assigned to the taxonomy.

wwdecompose decomposition After assignment, message appears indicating many modules

You can verify the assignment in Taxonomy Graph.


Assign table to taxonomies

Use this feature to assign tables to taxonomies instead of modules. It is useful when table ownership is a better starting point than module grouping for the taxonomy you want to build. Use this workflow to connect database objects directly to a taxonomy before moving into later graph and bounded context steps.

In the left navigation panel, navigate to Decomposition > Taxonomy Editor and switch to the "Assign Tables to Taxonomies" tab.

From the Available tables table in the left-hand side, select the tables using the -> .

The tables can be sorted or filtered based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available tables.

Select the tables using the -> alongside the table.

wwdecompose decomposition Select tables using - alongside table.

Once the tables move to the Selected tables window, it can be filtered or sorted based on the Name to narrow down your search. If you need to reset the filter, simply click Reset , and it will display all available tables.

wwdecompose decomposition Once tables move Selected tables window, filtered

If you wish to deselect any table listed on the right-hand side, click the next to it. It will move from the right side to the left side, indicating that it is deselected.

Then, click Next .

From the taxonomy table, select either an existing taxonomy clicking the -> .

wwdecompose decomposition From taxonomy table, select either existing taxonomy

Or create a new taxonomy by entering a name, selecting a type.

wwdecompose decomposition create taxonomy entering name, selecting type.

And then click Create taxonomy .

Once the taxonomy is selected (either new or an existing), it will appear on the right-side window.

wwdecompose decomposition Once taxonomy selected (either existing), will appear

If you wish to deselect any taxonomy listed on the right-hand side, click the next to it. It will move from the right side to the left side, indicating that it is deselected.

Then, click Next .

A message appears indicating the table assignment.

wwdecompose decomposition message appears indicating table assignment.

Finally click on Assign taxonomy .